Low

LPC1549JBD100 - 

ARM Microcontroller, ARM Cortex-M3, 32bit, 72 MHz, 256 KB, 36 KB, 100 Pins

NXP LPC1549JBD100

Obrázok slúži len na ilustračné účely. Prosím, pozrite si popis produktu.

Výrobca:
NXP NXP
Výrobcovo č. položky:
LPC1549JBD100
Objednávací kód:
2400140
Sortiment
LPC1500 ARM Cortex-M3 Microcontrollers

INFORMÁCIE O PRODUKTE

:
CAN, I2C, SPI, UART, USB
:
22I/O's
:
32bit
:
256KB
:
ARM Cortex-M3
:
100Pins
:
LPC1500 ARM Cortex-M3 Microcontrollers
:
72MHz
:
2.4V
:
LQFP
:
Each
:
3.6V
:
36KB
:
MSL 4 - 72 hours
Nájsť podobné produkty Vyberte a upravte atribúty vyššie na vyhľadanie podobných produktov.

Prehľad produktu

The LPC1549JBD100 is a 32-bit Microcontroller based on ARM Cortex-M3 core with RISC architecture operates at a maximum frequency of 72MHz. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching. The device incorporates 256kB internal flash, 36kB internal RAM, 4kB EEPROM, two 12-channel 12-bit A/D converter with sample rates of up to 2Msps and 76 general-purpose I/O pins. This device also features peripherals like one full-speed USB 2.0 device, two SPI interfaces, three USARTs, a fast-mode plus I2C-bus interface and a CAN module.
  • ARM Cortex-M3 built-in nested vectored interrupt controller (NVIC)
  • System tick timer
  • Serial wire debug (SWD) with four breakpoints and two watch points
  • Single-cycle multiplier supported
  • Memory protection unit (MPU) included
  • Simple DMA engine with 18 channels and 20 programmable input triggers
  • GPIO Interrupt generation capability with boolean pattern-matching feature on eight external inputs
  • Two GPIO Grouped port interrupts
  • Switch matrix for flexible configuration of each I/O pin function
  • CRC Engine
  • Quadrature encoder interface (QEI)
  • 24-bit 4-channel Multi-rate timer (MRT)
  • Repetitive interrupt timer for general purpose use
  • Windowed watchdog timer (WWDT)
  • 12MHz Internal RC oscillator trimmed to 1 % accuracy
  • Crystal oscillator with an operating range of 1MHz to 25MHz
  • Integrated PMU (power management unit)
  • Reduced power modes - Sleep mode, deep-sleep mode, power-down mode and deep power-down mode
  • Wake-up from deep-sleep and power-down modes
  • Timer-controlled self wake-up from Deep power-down mode

Aplikácie

Motor Drive & Control, Power Management, Industrial, Medical, Consumer Electronics, Automation & Process Control, Building Automation

Súvisiace produkty

Porovnaj vybraté produkty