LTC4002EDD-4.2#PBF

LTC4002 is a complete battery charger controller for one (4.2V) cell lithium-ion batteries. With a 500KHz switching frequency, It provides a small, simple and efficient solution to fast charge Li-Ion batteries from a wide range of supply voltages. When the input supply is removed, this device automatically enters a low current sleep mode, dropping the battery drain current to 10µA. An internal comparator detects the near end-of-charge condition while an internal timer sets the total charge time and terminates the charge cycle. After the charge cycle ends, if the battery voltage drops below 4.05V per cell, a new charge cycle will automatically begin. It is widely used in application such as portable computers, charging docks, handheld instruments etc.

• Input supply range is 4.7V to 22V – 4.2 version
• Charge voltage accuracy is ±1%
• End-of-charge current detection output
• 3hour charge termination timer
• Charge current accuracy is ±5%
• Automatic battery recharge, stable with ceramic output capacitor
• Automatic trickle charging of low voltage batteries
• Battery temperature sensing and charge qualification
• Operating temperature is -40°C to 85°C
• Packaging style is 10-lead plastic DFN

Poznámky

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party