MAX13335EGEE/V+

The MAX13335EGEE/V+ is a dual automotive differential audio receivers with I2C control and diagnostics in 16 pin QSOP package. It is a high -fidelity stereo audio input amplifier designed for automotive applications requiring audio-level detection and/or jack sensing capability. It features 2-ch, low noise, programmable gain amplifier that accepts fully differential and quasi differential input signals with diagnostics capability controlled through an I2C interface. The device's audio receiver can also pair with MAX13325 audio transmitter to form a complete differential audio link in automotive systems. Each channel features high 80dB CMRR enabling recovery of audio signals in presence of large common mode noise in automotive environments. Typical applications are radio head units, RSA/RSE, connectivity modules and automotive telematics.

• Operating voltage of 3.3V (3 to 3.6V) or 5V (4.75 to 5.25V), wide common mode input of -5 to 11.5V
• Automotive AEC-Q100 grade 2 qualified, operating temperature range from -40°C to 105°C
• Gain range from -14dB to +16dB, +28V to -16V tolerant inputs
• Automotive grade ESD protected against ISO 10605 ±15KV air gap and ±8KV contact discharge ESD pulses
• Fully differential inputs up to 7VRMS, quasi-differential inputs up to 3.5VRMS
• Audio presence detection, jack sense detection, diagnostic capability
• Programmable gain with zero-crossing detection
• 11mA quiescent supply current, 22Kohm differential and 14Kohm single ended input impedance
• 104.8dB of SNR at VOUT = 1.4VRMS, 8µVRMS output noise
• 0.5V/µs slew rate, -80dB crosstalk, -80dB mute attenuation

Aplikácie

Signal Processing, Automotive

Upozornenia

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Poznámky

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party