MAX3093EESE+

MAX3093EESE+ is a rugged, low-power, quad, RS-422/RS-485 receiver that features electrostatic discharge (ESD) protection for use in harsh environments. The receiver inputs are protected to ±15kV using IEC 1000-4-2 air-gap discharge, ±8kV using IEC 1000-4-2 contact discharge, and ±15kV using the human body model. The device features a 1nA low-power shutdown mode in which the receiver outputs are high impedance. When active, these receivers have a fail-safe feature that guarantees a logic-high output if the input is an open circuit. It also has a quarter-unit-load input impedance that allows 128 receivers on a bus. Applications include telecommunications equipment, rugged RS-422/RS-485/RS-423 bus receiver, receivers for ESD-sensitive applications, and level translators.

• Pin-compatible upgrades to 34C86
• Receiver differential input threshold is 200mV max at -7V ≤ VCM ≤ 12V
• Output short-circuit current is ±75mA maximum at 0 ≤ VOUT ≤ VCC, output enabled
• Receiver input resistance is 48kohm min at -7V ≤ VCM ≤ 12V
• Supply current is 2.4mA typ at no load, output enabled, VCC=+5.0V, TA=+25°C
• Input-to-output propagation delay is 98ns max at VCC=+5V ±5%, TA=TMIN to TMAX
• Propagation-delay skew (tPLH - tPHL) is ±10ns max at VCC=+5V ±5%, TA=TMIN to TMAX
• Maximum data rate is 10Mbps min at VCC=+5V ±5%, TA=TMIN to TMAX
• 16 narrow SO package
• Temperature range from -40°C to +85°C

Poznámky

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party