INFORMÁCIE O PRODUKTE
Alternatívy pre MPL115A2
Počet nájdených produktov: 1
Prehľad produktu
The MPL115A2 is a miniature I2C digital barometer in 8 pin LGA package. This absolute pressure sensor is suitable for low cost applications. Low current consumptions of 5μA during active mode and 1μA during shutdown (sleep) mode are essential when focusing on low power applications. The MPL115A2 employs MEMS pressure sensor with conditioning IC to provide accurate pressure measurements. An integrated ADC converts pressure and temperature sensor readings to digitized outputs via I2C port. Factory calibration data is stored internally in an on-board ROM. Utilizing raw sensor output and calibration data, the host microcontroller executes compensation algorithm to render compensated absolute pressure with ±1kPa accuracy. The MPL115A2 pressure sensor’s small form factor, low power capability, precision and digital output optimize it for barometric measurement applications.
- Digitized pressure and temperature information together with programmed calibration coefficients
- 50KPa to 115KPa absolute pressure
- Accuracy of ±1KPa
- Operating supply voltage range from 2.375V to 5.5V
- Integrated ADC
- I2C interface (operates up to 400KHz)
- 7bit I2C address (0x60)
- Monotonic pressure and temperature data outputs
- Operating temperature range from -40°C to 105°C
Aplikácie
Consumer Electronics, Portable Devices, Medical, Industrial
Poznámky
It is recommended to handle the MPL115A pressure sensor with a vacuum pick and place tool.
Technické údaje
Absolute
115kPa
5.5V
LGA
Digital
-
I2C
-40°C
-
50kPa
2.375V
LGA
8Pins
± 1 kPa
Surface Mount
-
105°C
-
Legislatíva a životné prostredie
Krajina, v ktorej boli vykonané posledné úpravy pred uvedením do predajaKrajina pôvodu:Taiwan
Krajina, v ktorej boli vykonané posledné úpravy pred uvedením do predaja
RoHS
RoHS
Certifikát zhody produktu